Free engineering calculators and unit convertersceo@instrumentationblog.in
Level Measurement · Glossary

What is a Tank Strapping Table?

level to volume tableLevel Measurement

A tank strapping table converts measured level into volume for a specific tank, from its measured dimensions.

Advertisement

Tank Strapping Table Explained

Real tanks are not perfect cylinders. Strapping measures the tank and produces a table of volume against level, often in millimetre steps.

Custody transfer tanks are calibrated to standards such as API MPMS Chapter 2. The level gauge reading is converted to gross volume through the table.

Advertisement

Calculators for Tank Strapping Table

CalculatorTank Strapping Table GeneratorFree online calculator with formula and worked example.CalculatorTank Volume CalculatorFree online calculator with formula and worked example.CalculatorHorizontal Tank Volume with Dished EndsFree online calculator with formula and worked example.

Frequently Asked Questions

What is a Tank Strapping Table?

A tank strapping table converts measured level into volume for a specific tank, from its measured dimensions.

Can I calculate a strapping table?

For process use, yes, from the geometry. For custody transfer, use a certified calibration.

Why does a horizontal tank need a table?

Volume does not change linearly with level in a horizontal cylinder.

You May Also Like

Learn more on the blog

Basics of level measurement

A practical guide on instrumentationblog.in with more detail on tank strapping table and how it is applied on real plants.

Read Full Article

Related Terms

Level termUllageUllage is the empty height or volume above the liquid in a tank, measured from the reference point down…Level termDished HeadA dished head is the curved end of a vessel, such as a 2:1 ellipsoidal or torispherical head, that adds…Level termLoad Cell Tank WeighingLoad cell tank weighing measures the mass of a vessel contents from load cells under its supports.

More Level Measurement Terms

Level termVessel Holdup TimeVessel holdup time is how long the volume between two levels lasts at a given flow, used to set alarm and…Level termOverfill ProtectionOverfill protection is the set of alarms, independent level switches and automatic actions that stop a…Level termRadiometric Level MeasurementRadiometric level measurement uses a gamma source and a detector outside the vessel; the liquid absorbs…Level termStilling WellA stilling well is a vertical perforated pipe inside a tank that calms the liquid surface for level…Level termLevel BridleA level bridle is an external vertical pipe connected to a vessel at two points, holding level…Level termSight GlassA sight glass is a glass gauge on a vessel that lets operators see the liquid level directly.

All level measurement terms · Full glossary A to Z

Advertisement